What are the daily inspection items of brake foot valve

Jul 29,2024

As a core component of the automobile braking system, the brake foot valve has the important responsibility of regulating the flow of brake fluid to ensure that the vehicle can quickly and effectively slow down or stop during driving. Given that the brake system is closely related to driving safety, it is particularly important to conduct a comprehensive inspection of the brake foot valve regularly.

Appearance inspection
A careful inspection of the appearance of the brake foot valve is an important part of maintenance. First, observe the surface condition of the valve body to determine whether there are obvious cracks, rust or other physical damage. The integrity of the valve body directly affects its sealing performance and working efficiency, so it must be ensured to be in good condition. In addition, the pipes connected to the brake foot valve should also be carefully checked to confirm whether there is oil leakage, and all connections should be tightened without looseness. Any fluid leakage may lead to a significant decrease in braking performance, thereby affecting driving safety.

Brake fluid inspection
The state and quality of the brake fluid are crucial to the performance of the brake system. Check the brake fluid level regularly to ensure that it is within the range specified by the manufacturer. Too low a level may cause brake failure, which in turn threatens driving safety. At the same time, observe the color and transparency of the brake fluid. Under normal circumstances, the brake fluid should be clear and transparent. If the color of the liquid becomes dark or turbid, it should be replaced immediately to avoid affecting the braking effect due to contamination. In addition, since the brake fluid has strong hygroscopicity, it is easy to absorb moisture after long-term use, resulting in a decrease in boiling point. The moisture content in the brake fluid can be tested by a moisture tester to ensure that it is within a safe range.

Seal inspection
The brake foot valve is equipped with multiple seals inside, and its normal operation is essential to the overall performance. Check the seals regularly to see if there are any signs of aging, cracking or deformation. Aging seals can easily cause brake fluid leakage, thereby affecting braking performance. At the same time, it is necessary to ensure that the valve can maintain good sealing under different working conditions to prevent brake fluid leakage.

Valve function inspection
Testing the function of the brake foot valve is also a necessary maintenance step. By manually operating the brake foot valve, check whether the valve is flexible and smooth. If the valve is found to be stuck or inflexible, it may need to be cleaned or replaced. At the same time, use professional equipment to perform pressure testing to ensure that the foot valve can withstand the specified pressure range when working, thereby ensuring the effectiveness of the braking system.

Connector inspection
The tightness of all connecting bolts and joints should also be paid attention to. During the inspection, make sure there is no looseness. Loose connections can cause brake fluid leakage, which in turn affects braking performance. In addition, wear, cracks or expansion of the connecting pipes should also be carefully checked. Any damage may cause fluid leakage or gas to enter the brake system, endangering the overall braking effect.

Lubrication inspection
During maintenance, properly lubricating the moving parts of the brake foot valve can effectively reduce wear and extend its service life. Choose a suitable lubricant and avoid using lubricants that will damage rubber seals to ensure the long-term stability and safety of the brake foot valve.

Back To News List

Hot Products

RELAY VALVE

Apr 13,2020

RELAY VALVE

Apr 13,2020

RELAY VALVE

The strategic goal of the factory: continue to research, develop and product the new air brake syste...

view details
OTHERS

Apr 13,2020

OTHERS

Apr 13,2020

OTHERS

view details
LEVELLING VALVE

Apr 13,2020

LEVELLING VALVE

Apr 13,2020

LEVELLING VALVE

The strategic goal of the factory: continue to research, develop and product the new air brake syste...

view details